The Twister processes various types of plants that require trimming and/or separation. From separating hops from their leaves to processing aromatic herbs, The Twister has many applications.

The Twister has two main components: The tumbler and blade unit which does the actual cutting, and the vacuum unit that assists in the separating. The material is inserted in one end of the tumbler as it rolls. The material rolls through the tumbler while being trimmed. The vacuum collects trimmed material such as stems and leaves and separates it into a collection bag.

This depends on the material being processed. On average, you can expect to feed at a rate of one heaping handful every four to six seconds.  Most of our customers are finding they can process approximately 10 pounds of material per hour

During daily use, The Twister should be cleaned as often as possible. Certain plant materials will cause build-up on the blades. This build-up will determine the cleaning requirements. It is advised to use a non-stick cooking spray on the blades to keep this build-up to a minimum (we recommend spray-on olive oil). Because the Twister was designed for the wash-down conditions of the food-handling industry, 5 minutes with a pressure washer will typically get the Twister very clean.

Yes, the Twister  has been outfitted with rubber tires, allowing for easy mobility on all surfaces. And because the frame is similar to the chassis of a race car, there are many locations to attach tie-down straps. And with the right technique, it is easily loaded onto decks, trailers, or vans with one person.

No problem. Trim Scene Solutions, Inc. stocks every part needed for Twister assembly and handles all warranty repair work.

The blade setup on the Twister is designed in such a way that when properly maintained and adjusted, the blades are self-sharpening.

Yes. There is a simple procedure to adjust the length of cut on the Twister.

When you purchase a Twister you will receive the cutting unit, a suction hose, a vacuum, a canvas cover, an instruction manual, and a one year warranty.

The North American Twister models require 120V for the cutting unit and 240V for the vacuum.

The 240V vacuum that comes with the Twister offers the best performance-to-price ratio.

Bucking is a process that is required on some plant sources to remove the flowers from the stem. Depending on the material being processed, bucking is typically done by hand or with scissors. If the plant you are processing has large fan leaves, it is also most efficient to remove them during the bucking process.

The bucking process, once perfected, is very quick. Once bucked, the Twister can do the rest. At over 320 cuts per second, you will quickly see the time saved by using The Twister.

No problem. This is really where The Twister shines. Harvesting small flowers by hand is very time-consuming. The Twister makes quick work of such jobs.

While one pass is usually sufficient, you can repeatedly send a material through the Twister without any harm being done. However, more than two passes is typically a waste of time.

Some customers use two Twister units back-to-back. They can effectively feed the Twister faster and get twice the overall cutting action.

Watch this YouTube video demonstration: Twister in Action

Yes. The Twister offers a one-year parts and labor warranty. An extended warranty plan is in the works. Trim Scene Solutions, Inc. is authorized to do repairs and has a full stock of parts

You can contact Trim Scene Solutions, Inc. with any warranty concerns. You will need to provide the serial number, proof of purchase, and a description of the defect.

Click Here>>>